Project Description

Heyco-Flex™ III Liquid Tight Fittings
(90° Sweep, NPT Hubs)

Heyco-Flex™ III Liquid Tight Fittings (90° Sweep, NPT Hubs)
Spec Sheet Button

Heyco-Flex™ III Liquid Tight Fittings (90° Sweep, NPT Hubs)

For Flexible, Nonmetallic Liquid Tight Tubing, 90° Sweep, NPT Hubs

  • For use with Heyco-Flex III Corrugated Tubing in trade sizes 3/8˝ through 1˝.
  • Nontoxic and UV resistant.
  • Rated for NEMA 4 and 4X applications when used with Heyco-Flex III Tubing. • Rated for NEMA Type 3R applications.
  • Easy, permanent assembly between the tubing and fittings: push the tubing over the fitting ferrule until the tubing clicks into place.
  • Lightweight and lower installed cost.
  • Quick and easy installation.
  • Suitable for use in high vibration or flexing applications (automotive equipment, fiber optics, computer and peripherals, lab equipment, robotics, etc.).
  • Resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL certification or testing.
  • For use in both wet and dry applications.
  • If using a tapped hole, Teflon® tape is needed on the threads of the connector, for all other applications an O-ring and Locknut are needed to attain liquid tight.
  • Use of an O-ring may be required for a complete liquid tight system with a non-threaded mounting hole.
  • Locknuts included with Straight-Thru fittings.
  • To order metal or nylon locknuts separately.

Heyco® Part Numbers:
1952, 1955, 1956, 1957, 1958

Contact RPD today to order.  317.883.6700